Pages

Monday, July 14, 2014

21

UHeart Organizing: Crafty Font Organization

Whether you are creating a digital file or a scrapbook page, fonts are a huge piece of any design process.  I know I personally love playing with different fonts and have a select that are considered my "go to", but easily forget about the other 101 that I love as well.  And if you are looking to keep a consistent theme over the course of your crafting, journaling or scrapbooking project, having a font reference will be extremely helpful.  My dear contributor, Sarah, loves integrating organized systems into her scrapbooking process to ensure she is making the most of her crafting time, and I just adore her solution for managing her font collection.



Confession: I’m a font fanatic. I love to have a wide variety of fonts at my disposal when creating scrapbooking pages and cards so that I can match the style of my journaling, captions and titles to the theme of the project.  Back in 2012, I visited Ms. Jones’ fabulous blog to share my ideas on organizing letter stickers, but for me fonts go well beyond stickers.  I can frequently be found exploring free websites for unique new fonts and I have a ton of font cartridges for my die cutting machine.  But as with any scrapbooking product or tool, I run the risk of not making full use of either my computer or die cut fonts because I can’t remember what I have.  That’s why I’m so excited to share my most recent craft organization solution.

For my computer fonts, I created a Font Catalog that I keep tucked in the front of my letter binder.


This somewhat tedious but super easy project took me about an hour, a great task to complete while watching TV.  I created a three-column table in Word.  In the first column, I repeated the phrase “The quick brown fox jumps over the lazy dog” for each of my fonts {this phrase contains all 26 letters of the alphabet}.  In the second column, I identified the font name.


Since I went through the fonts alphabetically, this was pretty easy to complete.  Once I had documented all the fonts, I went down the list and filled in the third column of my table with the category for each:
  • Cursive
  • Script
  • Serif
  • Sans serif
  • Theme
  • Shapes
{For those of you who aren’t quite the font nerd I am, a Serif font is one that has little feet on the letters, like F and I, such as Times New Roman.}  Once I had everything categorized, I then saved a new version of the Word doc and reorganized the fonts by category {keeping the alpha version will be a big help later if I ever need to re-create the categorized version}.

Again, this was not a super sexy step, as it involved a lot of cutting and pasting, but it was quick and well worth it: now I can flip right to the category of font I need and pick out the exact right style.


But my die cut fonts are a bit of a different animal.  While I can look at them in the font booklet or on the computer, nothing compares to looking at the cut out version.  But it’s a waste of time, paper and cutting blades to cut out a “test” version for each project.  So I wanted a solution that would allow me to quickly and easily look through all of my fonts, be durable and easily portable.  Then inspiration hit.  What if I cut out one sample letter from each font {I selected A} and created my own booklet?  I have to say, the finished product is even better than I expected!


The first step was obviously to cut out each of the letters.  I wanted each letter to be large enough that I could see all the detail, so I sized each to be approximately 2 inches high, though the width obviously varied.  Since I was using my Cricut and Gypsy, I created a new project in my Gypsy, went through each cartridge one-by-one {in alphabetical order} and added the letters to the mat. This way I could cut out my letters in a bit more of an assembly-line fashion.  But this first step will vary based on what type of die cutting machine or tool you have.  Once I had everything laid out the way I wanted it, I cut out the letters.



As I removed the letters from the cutting mat, l carefully stacked them in the order I cut them out.  This helped me when it was time to label each letter, because I was able to refer back to my Gypsy and determine which cartridge each letter came from.  Once all the letters were cut out, I needed to add adhesive so I could mount them on cardstock.  Bring on the sticker maker! {I actually have the Xyron sticker-maker in three sizes – all of which get a ton of use – and this largest one did double duty on this project as a laminator}.


If you don’t have a sticker maker {though if you’re a paper crafter, I highly recommend you run out and buy one right now – some of the best money you’ll ever spend, I promise!}, you could use Mod Podge or any other adhesive; this step might just take you a bit longer.

I originally planned to punch a hole in the letters themselves and string them on a ribbon, but I realized this would make it difficult to flip through the letters and much more likely that the letters would get damaged over time.  So I mounted each letter on cardstock instead.  I first determined the size of my cardstock mats by using the tallest and widest letters {which were not necessarily the same letter} to determine the dimensions.  I decided on 4X4, which left extra room around the edge for labeling the font.

Because the booklet will hang in my craft room and be used often, I wanted to make it fun and visually interesting.  I picked a deep shade of solid pink {one of the accent colors in my craft room} for the letters.  I originally planned to cut the letters from patterned paper, but I realized that would make it difficult to see all the details of the letter.  Instead, I used a variety of double-sided papers for matting, selecting patterns that are simple and symmetrical on both sides to avoid overwhelming the letters.


As a general rule, each sheet of cardstock got one letter on each side.  However, if a particular font had a complementing shadow font, I included both.  And while for most of the fonts I cut out only the uppercase A, in some cases the lowercase version was distinct enough that it needed to be included, too.  To help with categorization later on, each cardstock square got similar fonts on the front and back.


As I added each letter sticker to the mat, I also labeled it, indicating the name of the Cricut cartridge as well as the specific font name and any other detail that might be helpful.  I hand wrote my labels to make this step quick and easy.


Once all the letters were matted and labeled, it was time to laminate.  I’ll be flipping through these frequently, so I wanted to make sure they were durable.  If you don’t have a laminator or want a less expensive alternative, you could use Mod Podge to seal each one.


After laminating, I cut each mat out with my handy paper trimmer, leaving a little border of lamination around the sides to protect the edges of the paper.  The final size of each measured just over 4 inches square.

Similar to my Font Catalog of Word fonts above, I wanted to categorize my die cut fonts, so I sorted my laminated cards into the following categories:
  • Cursive
  • Serif
  • Sans Serif
  • Letters in shapes
  • Themed
I created divider cards for each of the sections to make it easy to flip to the right font.  I cut solid yellow cardstock into in 4 X 4.75 sheets and used my corner rounder punch to round the corners on one of the longer sides.  I then hand wrote a category label on each divider card.


The final step was to laminate them.


With all the font cards and dividers created, I could finally put them together.  I punched a hole in the first divider card, then used it as a guide to cut holes in the font cards and remaining divider cards.  Once all the holes were punched, I selected a coordinating ribbon and tied all the cards together.


I made sure to tie the ribbon securely enough to keep the cards together but loose enough that I can add new cards in the future if {okay, let’s be honest, when} I get new fonts.


I’ve even set aside some pre-cut mats and divider cards so they’re ready to go when I need more.  The final step was to hang my lovely new Font Portfolio within arm’s reach on the craft cart next to my desk.


I simply attached a binder clip, left both prongs up and looped the ribbon around them.


This little beauty has already been a big help with my crafting projects and I’m definitely making better use of my fonts.


Now I’m pondering other ways I can use this idea.  Hmmm… flash cards for the nieces and nephews? Do you have other ideas on how to use a cardstock booklet?  Do you have a great solution for organizing your computer or die cut fonts?


"My name is Sarah Eelkema and I live in a suburb of Minneapolis, MN with my husband of almost two years, Eric, and our two adorable Cavalier King Charles Spaniels, Hermes and Brontë. I am a Communications Consultant by day and by night/weekend/any spare moment, I indulge in my passion for writing, crafting and organizing. I am honored to share with all you dedicated iHeart fans my tips, tricks and secrets for organized crafting, which will not only help you get control of your craft clutter but also allow you to make more efficient and productive use of your precious crafting time. While I am blessed with an entire craft room, I promise to explain how all the solutions I share can be tailored to your specific situation, whether it be a dedicated room, a small storage space or mobile crafting. In the meantime, Happy Crafting!"

21 comments:

  1. Wow! Love the idea and your thoroughness!

    ReplyDelete
  2. I love this idea! Such a simple concept but so helpful :)

    ReplyDelete
  3. Www.wordmark.it has been a game changer for me! You type in your word or phrase and it shows you how it would look in every font on your computer. Oftentimes, the word I want to display looks totally different than the samples, so I find it helpful to see how my text will actually look!

    ReplyDelete
    Replies
    1. Thanks for the tip, Mindy. I'll have to check that out.

      :) Sarah

      Delete
  4. I have been using The Font Thing since around 2001 to choose fonts. Much like wordmark.it above, it allows you to see your word/phrase in all of the fonts on your computer (as well as the complete alphabet and "the quick brown fox..."). What's more, you can store your "extra" fonts in a separate directory (so it doesn't slow down your system) and install/uninstall on the fly through the interface. :)

    ReplyDelete
  5. instead of Word you could use excel and then just sort by column.

    ReplyDelete
  6. Oh Thank YOU so very much for this! I have been thinking of a way to do this that is pretty and useful! I can't wait to make one for my brand new craft room I am about to get!!

    ReplyDelete
    Replies
    1. You are most welcome. And have a great time with your new craft room!

      :)Sarah

      Delete
  7. Great idea as usual Sarah! They look so pretty.

    ReplyDelete
  8. I created a similar Word document with my fonts. One thing I added was numbers 0-9. The numbers are just as interesting as the letters and on a few occasions, I've downloaded fonts that don't contain matching numbers - which is important for some projects. I never thought of categorizing - great idea!

    ReplyDelete
    Replies
    1. Great tip, Christena. I know what I'll be doing this weekend! :)

      :) Sarah

      Delete
  9. Not related to the subject of this post but the last picture took my breath away!
    Bosphorus, Istanbul, Turkey... Such fond memories, awesome people and a gorgeous country. I cannot wait to go back and this little surprize made my day!
    Thanks so much,
    Mel

    ReplyDelete
    Replies
    1. I'm so glad I could brighten your day! Istanbul is definitely one of my favorite places I've visited.

      :)Sarah

      Delete
  10. This has to be the best thing I have ever seen! I have alot of 'free goods of the week' from creative market and this would be ideal! Most are fonts, but I could easily create sections for brushes, effects etc. Thanks for sharing!

    ReplyDelete
    Replies
    1. Have I mentioned that I Heart readers are the nicest, sweetest, most creative folks ever?! Thank you, Mummy and everyone else, for your kind words! You all have made my day.

      :) Sarah

      Delete
  11. Love the idea. I have taken what small amount of Cricut cartridges I have and cut 1 letter of each size out on a scrap piece of paper. I now don't need to cut a practice letter to check the size of my letters. Thanks for sharing your ideas.

    ReplyDelete
  12. You could also do something like this in Photoshop with digital papers and layers to make something similar if you do not have a Cricut. You could do a full word or phrase, numbers etc.

    ReplyDelete
  13. Where is your blue storage unit from? I love that!

    ReplyDelete
  14. Hi Sarah - Would you be willing to share your font catalog? I'd love a copy!

    ReplyDelete
  15. Sarah - what is your website?

    ReplyDelete

Thank you so much for taking a moment to join in on the conversation! I read and appreciate each and every comment, however, I will remove any comment that I believe to be inappropriate, malicious, or spam-like. I would love for this comment section to be used as a place to engage in purposeful dialogue, I only ask that everyone remains constructive and considerate.

All comments will be moderated and may take a moment to appear.